Zero-G™ Servo Hoist

Zero-G™ Servo Hoist Overview

The Zero-G™ servo hoist helps to improve the speed, precision, and ergonomics beyond that of a conventional push button hoist.   

This version of a hoist does not require up/down push buttons.  Instead the operator applies a small force to the handle grip and the hoist moves at a speed proportional to the force applied to the grip.  This hoist responds instantly with a correlating up or down movement. 

Float Mode

This type of servo hoist features a “float mode” for precise movements.  After pressing the float mode button an operator can push directly on the part and carefully position it into a fixture, for example.  Press the button again to exit float mode.

The display shows the current status, as well as the approximate weight of the load supported.

Model ZG-100

Capacity: 100kg (220 lb)
Travel Speed: Variable, up to 600mm/sec, dependent on weight
Chain Length: 3m
Chain Travel: 2.25m
Voltage: 240V single-phase
Max current draw: 15A

Model ZG-200

Capacity: 200kg (440 lb)
Travel Speed: Variable, up to 500mm/sec, dependent on weight
Chain Length: 3m
Chain Travel: 2.25m
Voltage: 240V single-phase
Max current draw: 15A